fbpx Impedance Spectroscopic Analysis of the InSe/ZnSe/InSe Interface |ARAB AMERICAN UNIVERSITY
Contact information for Technical Support and Student Assistance ... Click here

Impedance Spectroscopic Analysis of the InSe/ZnSe/InSe Interface

Authors: 
Al Garni, Sabah E
Qasrawi, Atef F
Journal Name: 
IEEE TRANSACTIONS ON ELECTRON DEVICES
Volume: 
64
Issue: 
1
Pages From: 
244
To: 
249
Date: 
Sunday, January 1, 2017
Keywords: 
Band reject filter; InSe/ZnSe; microwave cavity; thin-film transistor (TFT); varactor
Abstract: 
In this paper, n-InSe/p-ZnSe/n-InSe (npn) thin-film transistors (TFTs) are deposited onto cubic (111)-oriented Ag, Au, and Al thin-film substrates. The properties of the structures are explored by means of X-ray diffraction and impedance spectroscopy in the frequency range of 10-1800 MHz. Although the Ag, Au, and Al substrates are observed to be well aligned with the cubic ZnSe, the electrical properties of these TFT for the np (InSe/ZnSe) and npn interfaces are different. Namely, while the capacitance of the TFT deposited onto the Ag substrate exhibited positive values, the capacitance of the TFT deposited onto Au and Al films is negative in the range of 10-1100 and 800-1800 MHz, respectively. In addition, even though the impedance of the Ag/np/Ag and Ag/npn/Ag heterojunction monotonically decreasedwith the increasing frequency, the impedance of Au/np/Au and Au/npn/Au interfaces exhibited resonance peaks at 1211 and 1148 MHz, respectively. When the wave trap features are read from reflection spectra, it is observed that the Ag/npn/Ag and the Al/np/Ag exhibit lowpass filter properties and the Au/npn/Au behaves as a bandstop filter at a notch frequency of 1176 MHz. These properties nominate the npn transistors for use as microwave traps and as high-speed CMOS amplifiers.