fbpx Optical characterization of the MgO/InSe interface |ARAB AMERICAN UNIVERSITY
Contact information for Technical Support and Student Assistance ... Click here

Optical characterization of the MgO/InSe interface

Authors: 
Kayed, T. S.
Qasrawi, A. F.
Elsayed, Khaled A.
Journal Name: 
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS
Volume: 
252
Issue: 
3
Pages From: 
621
To: 
625
Date: 
Sunday, March 1, 2015
Keywords: 
coatings; dielectric properties; heterostructures; MgO; InSe interfaces; optical materials; terahertz devices
Abstract: 
In this work, a 500nm thick MgO layer deposited on the physically evaporated amorphous InSe thin film substrate is designed as a window for the MgO/InSe terahertz resonators. The optical properties including the reflectance and the dielectric constant dependence on the angle of incidence ((i)), the normal transmittance, and the absorption coefficient of the interface were investigated in the range of approximate to 270-1000THz. It was observed that the total reflectivity of the substrate continuously decreases with increasing (i) in the range of 33-80 degrees. The spectra of InSe and MgO/InSe revealed strong dielectric resonance patterns below 450THz. The energy bands of the direct allowed transitions in InSe film shrunk from 3.90, 2.75, and 1.49eV to 3.71, 2.10, and 0.96eV when MgO was deposited onto the InSe film. By analyzing the dielectric spectra, we were able to determine the static and lattice dielectric constants in addition to the oscillator and dispersion energies. The latter energy increased from 27.43 to 35.84 via interface construction.